REY
LUKE
ANAKIN
LIGHTSABER
Saberhilt: GRAFLEX & special core modifications by RO
Condition: USED style (Weathered)
Scale: 1:1 fullscale
Features & Maximum Ratings
- Dimensions : 1.6" x .93" x .26" (with the microSD card).
- Power supply : SINGLE CELL !!! 5.5V MAX / 3.5A (with the Luxeon LED). 1 li-ion cells (18650 or 14500) battery recommended.
- Up to 10 color profiles allowing the real time color change within a font. The use of a momentary is preferred as more natural to switch color, but there is support for latching too.
- Up to 6 sound fonts. Now with automatic font amount detection, board ships with the PC3 usual set of 3 fonts, but you can have only 2 or 6 if you like.
- Blaster Blocking, Force, Force Clash™ and Lockup Fx
- Blade Flickering Fx
- Blade Shimmering on Clash
- Blaster Sounds
- Up to 4 boot sounds
- Up to 8 swing and 8 clash sounds
- Flash on Clash™ (FoC™)
- Anti Power Off technology (A-POP™)
- 32 stage accent LED sequencer
- WAV file support
- True 16 bit, 22.050 kSamples/sec crystal clear DAC
- SD card support: up to 16GB (SD & SDHC), FAT16 or FAT32. Sandisk and Kingston brands preferred.
- Accent LEDs : 4
- Accent LEDs pad current source : 18 mA max per pad
- Handles momentary or latching for blade activation
- Compatibility : luxeon star III, V, K2, rebel, seoul P4, Ledengin, tri-rebel, tri-cree
- Speaker : 4-8 ohm, up to 2W. NOT provided, must be purchased separately.
- Idle current consumption : 9 mA (deep sleep mode)
- Real Time Configuration Editor (R.I.C.E.™)
https://www.facebook.com/ShameemCustomSabers/posts/970784412986972
Courrent Soupply: Li-ion 3.7V 700 mAh
Blade: Led "Corbin style" Show blade 1"OD 32 inches
Led Emitter:Blue/Blue/White Cree XP-E2 CopperNova
Number of Die:3
Collimator Lens 8.7 deg viewing angle
Extras:Primary Crystal Chamber LUX Blue Led
(Tibetan Quartz Crystal)
(Aqua Aura Quartz Crystal)with
Anakyn style gold-plated Blade Plug
Recharge port 2.1mm,
Kill switch
Dysplay box & Plaque
L.E1/1
|
