2016. április 19., kedd

REY Lightsaber The Force Awakens

Saberhilt: GRAFLEX & special core modifications by RO
Condition: USED style (Weathered) 
Scale: 1:1 fullscale
Soundmodul:Prizm Sound Module with Flash on Clash
Features & Maximum Ratings
  • Dimensions : 1.6" x .93" x .26" (with the microSD card).
  • Power supply : SINGLE CELL !!! 5.5V MAX / 3.5A (with the Luxeon LED). 1 li-ion cells (18650 or 14500) battery recommended.
  • Up to 10 color profiles allowing the real time color change within a font. The use of a momentary is preferred as more natural to switch color, but there is support for latching too.
  • Up to 6 sound fonts. Now with automatic font amount detection, board ships with the PC3 usual set of 3 fonts, but you can have only 2 or 6 if you like.
  • Blaster Blocking, Force, Force Clash™ and Lockup Fx
  • Blade Flickering Fx
  • Blade Shimmering on Clash
  • Blaster Sounds
  • Up to 4 boot sounds
  • Up to 8 swing and 8 clash sounds
  • Flash on Clash™ (FoC™)
  • Anti Power Off technology (A-POP™)
  • 32 stage accent LED sequencer
  • WAV file support
  • True 16 bit, 22.050 kSamples/sec crystal clear DAC
  • SD card support: up to 16GB (SD & SDHC), FAT16 or FAT32. Sandisk and Kingston brands preferred.
  • Accent LEDs : 4
  • Accent LEDs pad current source : 18 mA max per pad
  • Handles momentary or latching for blade activation
  • Compatibility : luxeon star III, V, K2, rebel, seoul P4, Ledengin, tri-rebel, tri-cree
  • Speaker : 4-8 ohm, up to 2W. NOT provided, must be purchased separately.
  • Idle current consumption : 9 mA (deep sleep mode)
  • Real Time Configuration Editor (R.I.C.E.™)
Soud Font: Graflex TFA HD by Shameem Moshrefzadeh
Loudspeaker:  2W Bass Speaker 
Courrent Soupply:  Li-ion  3.7V 700 mAh 
Blade: Led "Corbin style" Show blade 1"OD 32 inches
Led Emitter:Blue/Blue/White Cree XP-E2 CopperNova
Number of Die:3
Collimator Lens 8.7 deg viewing angle
Extras:Primary Crystal Chamber LUX Blue Led
 (Tibetan Quartz Crystal)
(Aqua Aura Quartz Crystal)with 
Anakyn style gold-plated Blade Plug
Recharge port 2.1mm,
Kill switch
 Dysplay box & Plaque 

Nincsenek megjegyzések:

Megjegyzés küldése